FineR ULTRA 110kg hardener (no resin) for epoxy resin for very deep pour

“FineR ULTRA” casting epoxy resin is a high-quality epoxy casting resin for very deep (12cm) and transparent castings. Great ability to pour large castings, deep pour of any objects, perfect air bubbles release, very smooth curing and crystal clear transparency – it is an excellent resin for casting epoxy river tables and tabletops same as making very deep pour big objects.

THE OFFER CONCERNS ONLY THE HARDENER – THE OFFER FOR THE RESIN ALONE CAN BE FOUND HERE

The epoxy casting resin is ideal for casting objects such as figures, stones, different fragile objects or simply coating photos. This resin can be very successfully used for casting thick layers on tabletops, kitchen tops etc.
Due to its slow hardener and long curing time, any bubbles have the opportunity to escape. You have also time to make modifications to your project if needed.

Pigments, glowing powder, pearl & metallic pigments, ink and colors

Our “FineR ULTRA” casting epoxy resin can be easily mixed with many different types of pigments, ink or powder. You can mix colors to obtain colors and shades you need. Glowing in the dark powder can be of course added and is also available. Usually, for the best glowing effect you can use between 5% – 50%.
You can obtain great colorful effects with LEDs systems – you can check our projects created with this resin and LEDs lighting.

Advantages of “FineR ULTRA” casting epoxy resin for deep pour:

• ATTENTION – RESIN NOT INCLUDED – ONLY THE HARDENER ITSELF. RESIN IS AVAILABLE HERE
• Mixing ratio: 100:50 by weight
• Hardener included
• Deep castings possible up to 12 cm thick per layer at 17°C
• Very transparent end result
• Extremely clear
• Long processing time
• Very good venting due to low viscosity
• Does not damage the bottom layers of paint
• Very good UV resistance. It can be even more protected with additional UV stabilizer
• You can use it outdoor without ‘yellowing’ effect with our UV stabilizer
• Pigments/powder/ink can easily be added for stunning effects
• You can pour several layers over each other
• Smooth, glassy surface
• Very low heat development
• Does not / hardly smell. Neutral odor
• First processing after 6 days

Deep pour transparent epoxy resin is ideal for the following applications:

• Pouring of big objects, diorama making, figure pouring
• Large and deep pouring areas like river tables or molds
• Surface coating for tables, floor, wood, concrete
• Perfect for Resin Art
• DIY work
• Boat repair
• For use with fiberglass, carbon fiber

Technical information

“FineR ULTRA” HARDENER :

• This is offer for HARDENER dedicated to FineR ULTRA resin. RESIN AVAILABLE HERE
• Mixing ratio: 100 (resin) : 50 (hardener) mixed by weight
• Maximum layer thickness:  12 CM. Long curing process allows to pour/cast thick layers of up to 12 cm in 17°C
• The minimum processing temperature: 13 degrees Celsius. The lower process temperature, the longer curing process takes.
• Processing time (pot life): approx. 30 hours
• Dust dry after: approx. 24-48 hours
• Full cure after: approx. 6 days
• Shelf life: At least 12 months in sealed containers at ambient temperature

Attachments

If you need larger quantities of epoxy resin please contact us: info@finewoodencreations.com